Wachs FF 206, Руководство пользователя

Страница: 30 / 90

SDB-103 Small Diameter Beveler and FF 206 Flange Facer
26 Part No. 16-MAN-01, Rev. 4-1109 E.H. Wachs
Installing the Extension Legs
Install the appropriate leg set to fit the pipe you are machin-
ing. Table 1 gives the I.D. range for each leg set provided
with the SDB 103 standard mandrel.
1.
To determine which leg set is required, measure the
work piece pipe I.D. and refer to the extension leg
chart in Table 1.
Figure 5-5. Use a scale to measure the I.D. of the
pipe.
Table 1: Standard Mandrel Extension Legs
Leg Set Thickness I.D. Range
None N/A 1.16–1.57” (37.8–39.8 mm)
16-021-01 0.218” (5.5 mm) 1.53–1.94” (38.8–49.25 mm)
16-021-02 .405” (10.2 mm) 1.90–2.32” (48.2–58.9 mm)
16-021-03 0.592” (15.0 mm) 2.27–2.69” (57.6–68.7 mm)
16-021-04 0.780” (19.8 mm) 2.64–3.06” (67.0–77.7 mm)
16-021-05 0.968” (24.5 mm) 3.02–3.43” (76.7–87.1 mm)
16-021-06 1.155” (29.3 mm) 3.39–3.81” (86.1–96.7 mm)
16-021-07 1.343” (34.1 mm) 3.76–4.18” (95.5–106.1 mm)