Operating instruction BA_074_2020-01_10.00 Universal panel indicator PH5100
Page 3/15
Operating manual
- 3 -
BA_074e, Rev.1C5
1. Introduction
Dear valued Customer!
Thank you for purchasing and using a product from our company. The universal digital panel meter
PH5100 from LABOM Mess- und Regeltechnik GmbH could be used for a numerous number of
applications.
For getting the highest effort out of this unit, we kindly ask you to follow the below mentioned
instructions:
Every person who is involved with the installation or usage of this unit, must read carefully
and understand the installation manual and safety instructions!
2.
Safety instructions
2.1 General information
To ensure the safe operation of this unit the instructions that appear in this manual must be strictly
observed. In addition, when used all applicable legal and safety regulations for the respective
application must be observed. The same applies correspondingly to the use of accessories.
2.2 Intended usage
Units from the PH5100 are used for collecting and displaying of a variaty of analogue sensor
signals. Any other use is regarded not in accordance with the intended usage.
The LABOM universal panel meters PH5100 are not meant to be used as sole safety
means to prevent dangerous situations on machinery and installations. Machinery and
installations must be so designed that fault conditions can not lead to harmful situations to
operating personnel (e.g. by independent limit value switches, mechanical locking etc.).
2.3 Qualified personnel
Units from the LABOM universal panel meter PH5100 must only be operated in accordance with
the technical specifications by qualified personnel. Personnel regarded qualified is familiar with the
installation, assembly, putting into operation and operation of the units and possesses adequate
professional qualification for the task.
2.4 Remaining hazards
Units from the LABOM universal panel meter PH5100 are state of the art and safe to operate. A
risk of danger can occur when deployed and operated improperly by untrained personnel.
In this manual remaining hazards are marked by the following warning symbol:
2.5 Legal responsibilityh
Liability for material defects and defects of this documentation, particularly for the accuracy,
correctness, freedom of protection or third party rights, completeness and/or usability - except for
willful misconduct or gross negligence - is excluded.
This symbol indicates that non-observance of the safety guidelines may
cause hazards to persons even serious injury or death and/or the
possibility of property damage.