3
WAC Lighting retains the right to modify the design of our products at any time as part of the company's continuous improvement program. JuLy, 2018
waclighting.com
Phone (800) 526.2588
Fax (800) 526.2585
Headquarters/Eastern Distribution Center
44 Harbor Park Drive
Port Washington, NY 11050
Central Distribution Center
1600 Distribution Ct
Lithia Springs, GA 30122
Western Distribution Center
1750 Archibald Avenue
Ontario, CA 91760
INSTALLATION INSTRUCTION
Volta 4.5” LED - Adjustable Round Trim
R4RAT, R4RAL
5. Before insert trim inside the trim assembly, the trim assembly need to be adjusted to the desired position horizontally and vertically.
See the following section of optional adjustment features for the details.
6. After finishing the adjustment, raise trim up to the trim assembly until the trim is flush with ceiling surface.
Be sure trim springs go into appropriate slots in the trim assembly (See
FIG.11 & 12
).
Wide Spring
Locking Screw
Guide Channel
Angle Indicator
Narrow
Slot
Narrow
Spring
Wide Slot
OPTIONAL ADJUSTMENT FEATURES
The adjustable trims can be adjusted to aim the light beam to accent objects, walls, etc.
This action to be done before the trim is installed.
1. Horizontal (Rotational) Adjustment
The trim assembly is capable of being horizontally rotated up to 365 degrees, and can
be locked in place once the adjustment is done.
a. Use the Philips-head screw driver to loose the locking screw
by turning anti-clockwise in order to rotate the trim assembly
freely to aim the beam of light horizontally (See
FIG.13
).
b. After adjusting the trim assembly to the desired position,
lock it in-place by turning the locking screw clockwise to the end.
2. Vertical (Angular) Adjustment
The trim assembly is capable of being vertically adjusted between
0-45 degrees, and can self-lock in place once the adjustment is done.
a. Insert the Philips-head screw driver into the guide channel.
b. Gently push up screw driver to release spring latch.
While holding latch up, tilt screw driver handle until the desired angle
is achieved. The angle indicator is marked with lines in 5⁰ increments
to assist with positioning (See
FIG.14
).
Note:
The adjustable trims have the Hot-Aiming feature for both horizontal rotation
and vertical adjusting.
FIG. 11
FIG. 12
FIG. 13
FIG. 14
