23
F-001/F-001L
16
17
18
WACFan_841812
NOTE
: If you change your Wi-Fi settings (SSID or Security
Passphrase you will need to perform a Wi-Fi reset on the fan
by holding down the fan speed up and fan speed down buttons
on the remote control for 10 seconds. The light on the remote
will flash green and the fan will sound two long beeps. You can
then use the Modern Forms Fans app to connect your fan to the
new network.
Factory Reset
Press and hold buttons for 10 seconds
Receiver Factory Reset
Press the reset button on the receiver
until the receiver beeps
Fan Wi-Fi Reset
Press and hold the
and for 10 seconds until LED
blinks green and receiver emits 2 long beeps
RESET
13
NOTE
: Factory reset will remove remote control(s), wall control(s)
and WAC app connections.
NOTE
: If advised by technical support, you can reset your fan to
factory settings by either holding down the light toggle, fan
toggle, and season button for 10 seconds or briefly depressing
the reset button on the fan’s receiver. The fan will emit three
beeps indicating the reset was successful.
