64
CAS-GPS IVU BASIC SYSTEMS INSTALLATION MANUAL
DOCU0085 Revision Q
CAN Bus
•
On the “SelfTest” tab, settings in this tab
relate to the node that will provide the second
GPS signal:
•
Node Enable:
This box must be checked
•
Comms Type:
This should be set to “CAN
Bus”. To change this box you must enter
the passcode.
•
Location:
This is the location of the node
GPS antenna (B) relative to the front left
corner of the body.
•
Sync:
Press this button to synchronise the
stored RX and TX values. This allows the
IVU to continually test its V2V to ensure
that the TX and RX signal strength does
not vary significantly from the time of
installation.
•
Save:
to finish press Save
B
B-Width
B-Length
B
Shovel IVU Configuration
– Self-Test Tab
