MIO-R45XRFR4836 Rev E
G&B Specialties Inc. 535 West 3
rd
Street, Berwick, PA, USA Tel: (570) 752-5901 Fax: (570) 752-6397
US Field Service: 570-441-6988; CAN Field Service 570-854-0482; www.rafna.com
-6-
R
EAR
L
OCK
-U
P
C
ABLE
I
NSTALLATION
P
ROCEDURE
For units equipped with a cable lock-up mechanism, use the following steps to install lock-up:
1.
Remove lock-up cover.
2.
Install the rear lock cable to the locking system by fastening the end of the cable through
the cable support, then thru the pipe on the locking cable bar at the center of the
railgear lock system as shown.
3.
Fabricate and install a bracket to hold the lock cable handle. Ensure that the handle will
be mounted near the railgear controls.
4.
Install lock-up cover on rear lock-up assembly. Torque ¼” fasteners to 12 ft-lbs dry.
5.
Follow the railgear lock system adjustment procedure.
Figure 2