WABROTECH WT20I, Руководство по эксплуатации

Страница: 43 / 73

9. If flushed with water 10. If the device will be stored for more than
14 days, after thorough cleaning of the
device, we recommend preserving the
unit with more vaseline oil. Place a bucket
with about 2 liters of vaseline oil under
the suction pipe. Now we put 2 pipes
inside. We turn on the cleaning mode and
when we see that the oil begins to flow
out through the discharge pipe, we turn
off the unit, leaving the oil inside.
11. Wipe the generator, hose and gun with a cloth soaked in water or mineral spirit.
Clean and check, reinstall filters.
we encourage you to rinse again with
petroleum jelly to leave a protective
film to prevent freezing or corrosion.
8. Remove the filters from the gun and unit.
Before the next use, rinse the unit with
water in the same way and when we see
that all the oil has been extracted from the
device, we can leave it for the next use.
7. Turn the work valve down to open the drain
valve. Disconnect the generator.
This will help prevent the wetted parts
from seizing, corroding or rusting.
17
WABRO sc ul. Arki Boÿek 2A, 41-910 Bytom
NIP: PL6263032331 | Regon: 381911373
Wabrotech.pl
Machine Translated by Google