76
6.
Starting-up and maintenance
After the machine has been professionally installed and securely mounted it must be connected to
the mains supply:
1. A qualified electrician must connect the supply lead of the drilling and milling machine to the
local power supply
2. A sufficient supply of lubrication coolant should be on hand in order to run the coolant unit
(optional)
3. All functions must be checked
In order to clamp workpieces a clamping screw (suitable for the T-grooves) or a machine vice may
be used.
4. Lubrication
The lubrication nipple shown below must be lubricated every 6-8 weeks (compare sketch)
The tailstock and the feed gear pinion must also be greased. To do this, the tailstock must be
moved backward and forward, putting some lubricant on the surface of the tailstock and the lateral
part of the feed spindle.
It is not necessary to lubricate the drilling spindle, as the ball bearings are fully enclosed and having
been lubricated during production, remain so for the entire service life of the machine.
The linear guides are maintenance-free and do not need greasing.
Lubrication means:
- reducing the wear and the friction resistance
- extending the lifetime
- preventing the metal surfaces from corroding
We recommend
:
for lubrication: multi-purpose grease grade 2NLGI
for oiling:
lubrication oil of 100 mm
2
/s viscosity
Содержание F1410 LF
