WABCO TP0735, Руководство по установке

Страница: 12 / 28

12
Installation
Fig. 3
4009668a
MTIS WARNING
LIGHT
BATTERY
RETURN
GROUND
MTIS CONTROL BOX
FLOW
SWITCH
PIGTAIL
W/DIODE
12 VDC FROM
J560 CONNECTOR
CONNECTED
TO POWER
CABLE D1
MTIS STATUS DETECTION BY MW TRAILER ABS SYSTEM
8. Remove the protective caps from the WABCO MTIS pigtail cable and the generic input/output (I/O)
cable.
9. Connect the WABCO MTIS pigtail cable to the sensor extension cable. Figure 1.
10. Connect the sensor extension cable to the generic I/O cable. Figure 1.
11. Secure the cable as appropriate with the correct strain relief to prevent overtightening or overstretched
condition that would damage the wire.
The MTIS indicator light must be either a load resisted LED lamp, part number 31263-20, or an
incandescent light. Refer to the Meritor part list on page 14.