WABCO TP0735, Руководство по установке

Страница: 11 / 28

11
Installation
5. Insert the black and white wires of the MTIS electrical cable through the unused black locknut and into
the MTIS box. Figure 2. Turn the black locknut CLOCKWISE to fasten securely.
Fig. 2
4006529c
12-VOLT RETURN
(BLACK WIRES)
12V
(WHITE
WIRE)
FLOW
SENSING
SWITCH
PETCOCK
DUAL MALE
TAB (BLACK
WIRE)
WABCO PIGTAIL
WIRE
Both black wires must be connected to one side of the flow switch (side with the dual male tab)
and the white wire must be connected to the opposite side of the flow switch.
6. Fasten the 12-volt (white) wire of the MTIS electrical cable terminal onto the tab on the opposite side
(bottom shown) of the flow sensing switch. Confirm that the +12-volt return (black) wire terminal of the
WABCO MTIS pigtail cable is attached to the flow sensing switch as shown in Figure 2.
7. Fasten the 12-volt (white) wire of the MTIS electrical cable terminal onto the tab on the opposite side
(bottom shown) of the flow sensing switch. Figure 2.
Refer to Figure 3 for more detailed assembly, installation, inspection and maintenance
information for MTIS.