WABCO OptiFlow Tail, Руководство по установке

Страница: 13 / 24

13
Installation
5.3 Final checks
Mechanics and alignment
Before you drive the vehicle with the OptiFlow
TM
Tail system, ensure the following:
– All OptiFlow
TM
Tail components must be firmly secured.
– Check if all mechanisms on the panels function with free movement. Operation of the panels must
be possible without restriction.
– Check if each bracket is fastened with the correct torque.
– Check if the panels fit closely on the trailer without a gap when the system is deployed.
– Check if the top panel (1) , when folded out, is below the respective side panel (2) .
If you have identified a misalignment, align the side panels correctly using the stopper by adjusting the
distance to the trailer’s outer edge:
1. Unscrew the screw M8 ( a ).
2. Position the stopper ( b ) so that the top panel is flushing with the side panel, see figure below
3. Tighten the screw M8 with 10 +/-2 Nm ( c ).