WABCO OnGuard, Руководство по установке, Страница: 7 / 32

7
Installation Procedures
3. Check the bumper type to determine the correct location for mounting the radar to the bracket. For
trucks with an aerodynamic/Aerodyne bumper “A”, position the radar to the upper mounting holes
marked “A” as shown (Figure 1 and Figure 2). For trucks with a Hendrickson bumper “B”, position the
radar to the lower mounting holes marked “B” as shown (Figure 3 and Figure 4).
Fig. 1
4014091a
AERODYNE BUMPER
USE “A” MOUNTING HOLES
Fig. 2
4014089a
“A” MOUNTING HOLES
Fig. 3
4014092a
HENDRICKSON BUMPER
USE “B” MOUNTING HOLES