Page 5
Mechanical Assembly
Step 1
It is highly recommended to use two people for the installation
of this product. Before assembly, place the unit in the appropriate
final location to make the assembly process easier. The unit should
be placed top side down on the floor according to box instructions.
Place the two boxes side to side and remove the top covers. Cut
and remove the cardboard dividing the two boxes as indicated in
the photo. Only remove this portion of the boxes at this time.
X X X X X X X X X X X X X X X X X X
Step 1.3
Insert 2 long Allen/Hex socket screws in the frame aligning
plates in the middle section of the tubular steel frame.
Step 1.2
Insert 4 short Allen/Hex socket screws through the aligning
brackets to hold the sections together, you will need 2 screws
per side to complete assembly.
Step 1.1
After eliminating the cardboard divider, bring the two sections of the bed together so the tubular steel frames are aligned and touching
each other. Align all screw holes on the sides and the middle of the frame, install the Allen/Hex head screws at this point.
