Page 18 of 48
PAM-199-P
4.4.3 Input and output signals
Connection
Supply
PIN 7
Power supply (see technical data)
PIN 8
0 V (GND) Power supply (ground).
Connection
Reference voltages output
PIN 12
Reference output voltage (8 V)
Connection
PWM output
PIN 3 / 4
Current controlled PWM outputs for solenoid A
PIN 1 / 2
Current controlled PWM outputs for solenoid B
Connection
Analogue input signals
PIN 9 / 10
Command (input) signal A, 0…100 % corresponds with 0…10 V or 4…20 mA, scalable.
PIN 13 / 14
Command (input) signal B, 0…100 % corresponds with 0…10 V or 4…20 mA, scalable.
PIN 11
0 V reference for the signal inputs (potential from PIN 8).
Connection
Digital inputs and outputs
PIN 15
Enable Input Channel A/B or Channel A (dependent on ENABLE_B)
:
General enabling of the application (Channel A).
PIN 6
Enable Input Channel B (dependent on ENABLE_B)
:
General enabling of the application of Channel B.
PIN 5
READY output
:
ON:
No internal or external errors are detected.
OFF:
Both power stages are deactivated or an error is detected.
