W Box 0E-A100, Руководство пользователя

Страница: 4 / 36

4
Introduction
Congratulations and thank you for purchasing the W Box Technologies 0E-A100
Subwoofer Amplifier!
The 0E-A100 may be small in physical appearance but its got all the muscle you need to
drive even the most demanding subwoofers to house thumping levels.
The 0E-A100 is a Class D 100 Watts amplifier that when properly installed, runs cool
under almost any load.
The 0E-A100 features a stereo/mono line level audio input that can receive full band
audio from any audio amplifier, receiver or preamp or an LFE input from an appropriately
featured device.
The adjustable crossover allows fine-tuning the 0E-A100 low frequency input setting to
properly complement any full-range speakers or room conditions.
In addition, the 0E-A100 features a phase adjustment that provides sub performance
optimization given the subs placement relative to the main speakers.
Finally, if you just need more thump, there is a Boost switch that will provide a 6dB boost
at 40 Hz...just in case you want some extra kick.
The 0E-A100 is audio-sensing so anytime an audio signal hits the 0E-A100 inputs, the
amp will instantly turn ON. The amp will also turn itself OFF after 15 minutes when no
audio signal is present. There is also a 12VDC Trigger that will turn the 0E-A100 ON
when 12-24VDC is applied and turn the amp OFF when the voltage is removed.
The 0E-A100 is the perfect match for many applications but makes a particularly great
running mate with the W Box Technologies OE-D2.1 Stereo amp with subwoofer out,
(see the system illustration in the Connections section).
Please read and follow the instructions in this User Manual to assure you are getting the
most from your new W Box Technologies 0E-A100 Subwoofer Amplifier.