www.prolight.co.uk
RM 10
User Manual
4
Receiver front panel identification:
1. Audio Indicator:
The LED Audio Peak indicator will illuminate
green to show when the audio signal is being
received by the receiver.
2. RF Signal Indicator:
The LED RF Signal indicator will illuminate amber
when the receiver unit receives a valid RF.
3. Volume Control:
The receivers output volume is adjustable.
Turn the level control anti clockwise to the
lowest setting, or turn clockwise to adjust to
the highest setting.
4. Power Switch:
On/Off control for the receiver unit.
Receiver rear panel identification:
1. Antenna:
The antenna receives the RF radio signal
from the transmitter unit. For optimum
reception, orientate vertically. Reception
maybe impaired by obstacles between
the transmitter and receiver. High
power electrical equipment can cause
unwanted interference.
2. Balanced Audio Outputs:
Individual, balanced audio outputs
via 3 pin XLR for each of the two audio
channels.
3. Audio (MIX) Output:
6.35mm (1/4”) jack socket outputting
an unbalanced, 400mV line level audio
output featuring both audio channels.
4. DC Power Input:
The receiver is powered by a standard
DC power input 12-15V DC, 300mA
regulated voltage supply.
3
1
1
2
2
3
4
3
2
2
1
1
4
Operating instructions
