W Audio DTM Series, Руководство пользователя

Страница: 8 / 12

www.prolight.co.uk DTM Series User Manual
7
Operating instructions & troubleshooting
Beltpack transmitter
identification:
1. Microphone Input
2. Volume Control
3. On / Off Switch
4. Power Indictor (illuminates when
battery is low and requires changing)
5. Antenna
6. LCD Display
7. IR Transceiver
8. Battery compartment (care should
be taken to observe battery polarity)
9. Battery cover 1 2 3 4 5
6
8
9
7
Belt pack transmitter plus headset and lavalier microphones
to be used in place of the handheld transmitter.
Optional DTM Series
Add On Beltpack Kits
Specifications DTM 800BP DTM 600BP
Operating frequency 863.0Mhz-865.0Mhz 606.0Mhz-614.0Mhz
Battery type 2 x 1.5V AA (not supplied)
Order code MIC71 MIC73
NOTE:
The DTM 600/800 system is shipped with
two handheld transmitters. The receiver in
this system features a dual channel receiver
allowing both handheld microphones to be
used simultaneously, an additional belt pack
kit maybe purchased if required to be used
in place of the handheld transmitters. Each
receiver channel in this system may only be
used with one transmitter at any one time. If
the user attempts to power on, and use two
transmitters with one receiver the system will
malfunction and not operate correctly as one
transmitter will cut out the RF Radio signal to
the second transmitter.
Available in two frequency ranges, the
DTM800 series is for use in the 863-865Mhz
CH70 band license free while the DTM600
series is for use in the 606-614Mhz CH38
band. To operate microphones in the 606-
614Mhz CH38 band the user must obtain a
license from the relevant authorities before
using the product.
Microphone System compatibility versions
- Several variants of the DTM Microphone Systems have been available over
the years and not all components are compatible, please see information below.
Transmitters without a small white sticker are Version 1,
transmitters with a small white sticker are Version 2 as
per the photo below.
Receivers - The serial number denotes the software type
either Version 1 or Version 2.
V1 Software
PL082017**** (fixed antenna)
PL062018**** (fixed antenna)
PL122018**** (BNC antenna)
V2 Software
PL052019**** (BNC antenna)
PL032020**** (BNC antenna)
All on-going versions will be Version 2