Vytronix JETW1800, Инструкция по эксплуатации

Страница: 4 / 12

2
x If the power cord is damaged, it must be replaced only by Vytronix to
comply with warranty terms and conditions.
x
Do not let children or people who have not been trained in the use of a
pressure washer nor read the instruction manual operate the machine
unless properly supervised by a responsible adult.
x Before starting up your machine please check it carefully for any defects.
If you find any, do not start up your machine and contact Vytronix
immediately.
x Hold the pressure gun and lance firmly with both hands.
x The operator and anyone in the immediate vicinity of the site of
cleaning should take action to protect them from being struck by debris
dislodged during operation.
x
Wear goggles or other eye protection during operation.
x Take special care when pointing at tyres and/or tyre valves as they
may be damaged by the high-pressure jet, causing them to burst.
x
This pressure washer must not be used at temperatures below 0°C.
ELECTRICAL CONNECTION
If an extension cable is used, the plug and the socket must be waterproof and
comply with the below mentioned requirements for length and cable dimensions.
x 1.0 mm² max. 12.5 m
x
1.5 mm² max. 20 m
WATER CONNECTION
x Connection to the public mains water supply according to local regulations.
x Inlet connection can be connected to mains water supply with a max pressure
of 10 bars.
IMPORTANT!
Only use water without any impurities. If there is a risk of sand particles in the
inlet water (i.e. from your own well), an additional filter should be mounted.