Page 11 of 12
Cleaning blocked accessories
Due to the water hardness in some areas, you may notice that less steam comes out from
the handheld steamer accessories, this may be caused by calcium buildup inside the tip of
the accessory nozzle.
How to clean calcium buildup
We recommend using a spray lubricant. Spray a small burst or two of the lubricant inside the
tip of the Jet Nozzle. After spraying lubricant inside the component, fill the steamer with
water according to the filing directions and run a continuous jet of steam through the
affected accessory for several minutes to remove the deposit once the steam pathway is
clear, aim the steamer at a neutral surface or cleaning cloth to make sure no debris is
emitted.
This product contains no serviceable internal parts. Do not try to repair it yourself. Any
maintenance or repair that requires disassembly or any steps other than those stated in this
manual must be carried out or approved by Vytronix Ltd.
Cleaning the microfiber pad
Machine washable on at 30 – 40 degrees. Always use water only or a mild detergent.
For best results, lay flat to dry. Do not tumble dry
IMPORTANT
:
Never use bleach or fabric softener when washing the microfiber cleaning
pad.
Storage after use
After the steamer is used, switch off the power and then unplug the power cord.
Take out the water tank and empty the residual water and wipe the external surface with a
dry cloth.
Remove the cleaning pad and wash it so that it will be ready for next use.
;
Store product in a protected, dry area.
Keep out of reach of children.