6
TROUBLESHOOTING
ERROR
CAUSE
SOLUTION
No LED lights
on display
No power available
Check if the MCB and RCCB at the
switchboard is ON or Isolator is turned ON.
Blue Display
Power available
Normal operation during charging
- no action required.
Flashing Green Display
Vehicle Charging
Normal operation during charging
- no action required.
Flashing Red Display
Faulty Charging cable or
earth fault in car/lead
Remove lead from car and charger.
Inspect cable for damage, if OK retry lead.
If LED’s return to Flashing Red, remove
lead. Try another cable to check the VMEV
Charger.
If LED’s return to Flashing Red, remove
lead, isolate VMEV Charger power at
switchboard. Leave off for 30 seconds
before re-powering and reconnecting
lead.
If LED’s still flashing red, contact your
supplier or Vynco for assistance.
Vehicle not charging
Power not on
Check LED display is on and turn power on
if required.
Plug fitted incorrectly
Ensure plug is pushed into VMEV Charger.
Connector fitted
incorrectly
Ensure connector is pushed in to the
vehicle inlet.
Vehicle not detecting plug
Always plug into vehicle first then the
VMEV Charger.
Vehicle charging system
not turned on
Check vehicle manual for charging
instructions – lock vehicle doors or push
charging button on vehicle.
Fault in charging cable
Try another cable, check cable and plugs
for damage.
