VYKING FORCE VF3600P, Инструкция по эксплуатации

Страница: 19 / 44

19
PRESSURE WASHER 3600P
5. Effective cleaning depends on both the pressure and volume of the water used, to
the same degree.
6. When not spraying, use the spray gun safety catch/safety lock to prevent accidental
high pressure discharge.
Stop the engine
!
WARNING
During operation the pressure washer must be
positioned on a firm, stable surface.
Stop the engine according to the operating instructions in the engine section of this
manual.
1. Run unit with clean water only to purge any chemical or detergent solution in the line.
2. To stop the engine, set the throttle to idle and turn the engine ON/OFF switch to the
“OFF” position.
3. Turn the fuel off according to the engine section of this manual.
4. Squeeze trigger to relieve pressure from lines & pump.
5. Turn water supply off & disconnect.
Chemical and detergent application
1. Fill detergent tank with appropriate detergent suitable for your applications. Follow
instruction and safety guidelines set out in detergent manufacturer’s manual.
2. To deliver the detergent at the correct pressure, fit black chem/soap nozzle to the
lance. Be sure the pressure washer is off when switching the nozzles.
3. Connect the detergent bottle to the pump with the hose via the detergent inlet on the
top of the pump.
!
WARNING
To prevent accidental starting that could cause
serious personal injury, always switch off the
engine and disconnect the spark plug wire/lead
before carrying out maintenance work.
Regular maintenance will improve the performance and extend the life of the pressure
washer. Failure to maintain the machine in line with the services outlined in the manual
will invalidate warranty. High pressure accessories carry a 3 month warranty. The
pressure washer’s warranty does not cover items that have been subjected to operator
abuse or negligence. To receive full value from the warranty, the operator must maintain
the pressure washer as instructed in this manual, including proper storage as detailed in
“Storage” section below.
All maintenance tasks must be performed with the engine and water supply shut off.