VYKING FORCE VF3500P, Инструкция по эксплуатации

Страница: 17 / 44

17
PRESSURE WASHER 3500P
Adjustments
Pressure adjustment
The pressure on the pump is preset at its maximum operating pressure to optimize
performance and pump life. We recommend not adjusting the pressure setting. Use the
nozzles supplied to adjust the pressure.
!
WARNING
ALWAYS ensure the spray gun trigger is not on
when changing the nozzle. The nozzle must
‘click’ when inserted to be properly connected.
Do not twist nozzle when spraying.
Adjusting the spray nozzle
Water flow is adjusted by regulating the nozzle. Your pressure washer comes in 5
different colour coded quick connect nozzles that provide spray widths from 0°, 15°, 25°,
40° & a chemical (soap) nozzle. You can simply adjust the spray pattern & pressure by
selecting a different nozzle.
Red Nozzle = 0°
The highest pressure nozzle producing a pencil point pattern with no fan coverage. Ideal
for aggressive cleaning such as removing caked mud from equipment, removing stains
from concrete, steel & aluminium. Not recommended for decks, painted surfaces & cars.
Orange/Yellow Nozzle = 15°
Referred to as a chiseling tip. Narrow fan for high performance. Held at a 45° angle
to the work area it can be used as a chisel or scraper to remove dirt & debris such as
peeled paint or mildew.
Green Nozzle = 25°
Known as the wash tip it has a medium fan for multi-purpose application. It delivers
medium impact pressure and cleaning coverage.
White Nozzle = 40°
With the largest fan area it delivers relatively low pressure ideal for delicate surfaces.
Ideal for washing & rinsing large areas or washing vehicles.
Black Soap Nozzle
This tip is used for chemical / detergent application. It is the lowest pressure nozzle
creating the largest orifice.