Vyaire VELA, Руководство по обслуживанию

Страница: 45 / 111

5-8
Chapter 5: One-Year P.M. Procedure
33373-001 Version A
CAUTION
When removing the mufflers from the housing, DO NOT use the turbine as leverage or pry the
mufflers out of the housing. If the turbine is pulled while removing the mufflers or the mufflers are
pried out of the housing, rather than pulled straight out, damage to the VELA may result.
To remove the left side muffler, using needle nose pliers, firmly grasp the metal grid inside the
housing and pull the muffler straight out of the housing assembly using a clockwise twisting motion.
Figure 5-11. Removing the Filter Assembly
NOTE
Only the Right side muffler has a filter attached, the Left side is a muffler only.
Figure 5-12. Filter Assembly
Using the muffler filter insertion tool, P/N 27351-002, make sure the seam on the filter is horizontal
and install the new muffler/filter assemblies P/N 10365, into the right side of the housing. Be sure
to push the muffler into the housing until the tool is flush with the housing (Figure 5-13). When
installed to the correct depth, the muffler will be behind the ridge inside of the housing (Figure 5-14).
NOTE
The muffler filter insertion tool, P/N 27351-002, is designed to insert the new mufflers into the
housing to the correct depth. .
NOTE
Some of the muffler/filters may be larger in diameter than others, do not force these into the
housing, instead squeeze the muffler for a minute and then quickly install the muffler into the
housing using the muffler filter insertion tool .