18
vwr.com I Instruction manual VWR® A Water System
2.4.4.2 Installing the Dispenser 3 (171-1275)
a)
Take out the base kit and assemble. The base is assembled differently on the left and right sides
of the crossbar. Refer to the pictures below to install the base.
b)
Open the side panels of the main system on both sides. Remove the screws as shown below.
c)
Remove the corresponding cap from the crossbar. Remove the insert block from the cap.
d)
Insert the inner block into the base and then insert the base into the crossbar. Fix it with the
screw.
Install one base on the
left side of the system
Install the other base on
the right side of the system
Base kit
The left side of the system
The right side of the system
Caps
Fixed block
