8
e. Press “Start” to record the fourth and final temperature in the melting range.
Ramping will stop and the oven temperature will immediately start decreasing
back to the set temperature selected in Step 3.
8. View Recorded Data:
NOTE: BASIC UNIT DOES NOT HAVE MEMORY CAPACITY. DATA WILL NOT BE
ABLE TO BE VIEWED AFTER THIS STEP.
a. After the final temperature is recorded, “View Data?” will be shown on the
display.
b. To return to the set temperature screen without viewing the data, press “Stop.”
c. To view the data for the test that was just completed, press “Start” and use
the Up Arrow to scroll. When viewing is complete, press “Stop” to return to
the set temperature screen.
9. Repeat Steps 4-8 to continue testing with the same set temperature
selected in Step 3.
10. If a new set temperature is required, use the Up and Down Arrows to
select a new temperature. Repeat Steps 4-8 to continue testing with the
new set temperature.
11. If testing is complete, Press “Stop” after Step 8 to turn the heater off and
return to standby mode.
12. Unplug unit when it is not in use.
b
asIc
M
eltIng
P
oInt
a
PParatUs
o
PeratIng
I
nstrUctIons
c
ont
’
d
SET DATE AND TIME – BASIC ONLY:
1) Hold “Set” button and press Up Arrow for 3 seconds
2) When “Set Date/Time?” is displayed on the LCD screen, press “Set”
3) Use Up and Down Arrows to select the month, and press “Set”
4) Use Up and Down Arrows to select the day, and press “Set”
5) Use Up and Down Arrows to select the year, and press “Set”
6) Use Up and Down Arrows to select the hour, and press “Set”
7) Use Up and Down Arrows to select the minute, and press “Set”
8) Use Up and Down Arrows to select “A” for AM or “P” for PM, and press “Set”
9) If the correct date and time are displayed on the screen, press “Stop” to return
to standby mode
