VWR 5700 Series Скачать руководство пользователя страница 83

Страница: 83 / 90

10-2

ULT Freezer

VWR International

Section 10

Warranty Information

10-2

ULT Freezer

VWR SCIENTIFIC PRODUCTS

TANDARD

AND

SIGNA

TURE SERIES UL

T FREEZER W

RRANTY

- INTERNA

TIONAL

The W

arranty Period st

art

s two months from the date your equipment is shipped from our facility

This allows for shipping

time so the warranty will go into ef

fect at approximately the same time your equipment is delivered.

The warranty protection

extends to any subsequent owner during the warranty period.

During the first two years of the warranty period, component p

art

s proven to be non-conforming in materials or workmanship

will be rep

aired or replaced at VWR/Thermo Scientific's expense, labor excluded.

The Signature Series UL

Freezers include

an additional three year warranty on the compressors, p

art

s only

, F

.O.B. factory

. Inst

allation and calibration is not covered b

this warranty agreement.

The

echnical Services Dep

artment must be cont

acted for warranty determination and direction

prior to any work being performed. Expendable items, i.e., glass, filters, pilot light

s, light bulbs and door gasket

s are exclu

ded

from this warranty

Replacement or rep

air of component p

art

s or equipment under this warranty shall not extend the warranty to either the

equipment or to the component p

art beyond the original two year warranty period. VWR and/or

Thermo must give prior

approval for the return of any component

s or equipment.

THIS W

RRANTY

IS EXCLUSIVE

AND IN LIEU OF

ALL

OTHER W

RRANTIES, WHETHER WRITTEN, ORAL, OR

IMPLIED. NO W

RRANTIES OF MERCHANT

ABILITY

OR FITNESS FOR

TICULAR PURPOSE SHALL

APPL

Thermo shall not be liable for any indirect or consequential damages including, without limit

ation, damages relating to lost

profit

s or loss of product

our local VWR Sales Of

fice is ready to help with comprehensive site prep

aration information before your equipment arrives.

Printed instruction manuals carefully det

ail equipment inst

allation, operation, and preventive maintenance.

If equipment service is required, please call your local distributor or the

echnical Services Dep

artment at 1-740-373-4763

(1-800-438-4851 in USA

or Canada). W

e're ready to answer your questions on equipment warranty

, operation, maintenance,

service, and special applications. Out

side the USA, cont

act your local distributor for warranty information.

ISO 9001

REGISTERED

Rev

. 6 5/09

Содержание 5700 Series



























































































Результаты поиска

Содержание 5700 Series

Отзывы:

VWR 5700 Series, Руководство по эксплуатации и техническому обслуживанию, Страница: 83 / 90

Результаты поиска

Содержание 5700 Series

Отзывы: