VWR 5700 Series, Руководство по эксплуатации и техническому обслуживанию, Страница: 34 / 90

4. Open the freezer lid and locate the probe cover on the upper front left
wall. Remove the two Phillips head screws securing the probe cover
(see Figure 5-5).
5. Route the BUS probe through the probe port, approximately 12”.
Secure the back-up probe to the temperature probe using a small tie
wrap (Figure 5-5).
6. Seal around the interior and exterior opening of the probe port with
Permagum sealant.
7. Reinstall the probe cover (Figure 5-5).
ULT Freezer 5-3 VWR International
Section 5
Factory Installed Options
Figure 5-4. Probe Access Port
Figure 5-5. Probe location
Install Temperature Probe
(continued)