VWR International MU 6100 H, Инструкция по эксплуатации

Страница: 75 / 96

MU 6100 H Maintenance, cleaning, disposal, accessories
ba77077e02 09/2014
75
13.2 Cleaning
Occasionally wipe the outside of the measuring instrument with a damp, lint-
free cloth. Disinfect the housing with isopropanol as required.
13.3 Packing
This meter is sent out in a protective transport packing.
We recommend: Keep the packing material. The original packing protects the
meter against damage during transport.
13.4 Disposal
This equipment is marked with the crossed out wheeled bin symbol to indicate
that this equipment must not be disposed of with unsorted waste.
Instead it's your responsibility to correctly dispose of your equipment at lifecycle
-end by handling it over to an authorized facility for separate collection and
recycling. It's also your responsibility to decontaminate the equipment in case
of biological, chemical and/or radiological contamination, so as to protect from
health hazards the persons involved in the disposal and recycling of the equip-
ment.
5. Close the battery compartment.
6. Set the date and time
(see section 5.4.6 E
XAMPLE
2
ON NAVIGATION
: S
ETTING THE DATE
AND TIME
, page 24).
When the batteries are nearly discharged, the status indi-
cator is displayed.
Dispose of used batteries according to the local regulations of your
country.
End users within the European Union are obligated to return used
batteries (even ecologically compatible ones) to a collection point
set up for recycling purposes.
Batteries are marked with the crossed-out waste container symbol.
Therefore, they may not be disposed with the domestic waste.
CAUTION
The housing is made of synthetic material (ABS). Thus, avoid
contact with acetone or similar detergents that contain sol-
vents. Remove any splashes immediately.