Place one of the Legs (Part #4) into the Crossbar End (Part #2)
Line up the holes on each Leg (Part #4) with the holes on each
Crossbar End (Part #2)
Using the Allen Wrench, rotate each screw just a few turns.
If you are having di
fficult
y ins
er�n
g any of the
screws from Step 3 or 4, it is because some of
the installed screws are too
�g
ht.
Lay out all components and hardware to ensure that you have all components and hardware listed on the
parts page.
Fully separate the Crossbar Ends (Part #2). You will
fin
d the Crossbar Center Rails (Part #1) inside.
Using the supplied Allen Wrench, insert four (4) M6x12 Machine
Screws (Part #7 ) through the holes in each Crossbar End (Part #2) going
into the Leg (Part #4) and rotate each screw just a few turns.
You will need to dip the assembly over to gain access to all four (4) M6x12
Machine Screws (Part #7) .
ASSEMBLY INSTRUCTIONS
Posi�on one of the Side Bracket (Part #3) on its side.
Tighten the screws M6 X 35(Part #9 ) from the top.
STEP1
STEP2
STEP3
If you drop a screw inside the Crossbar End (Part #2), simply tilt
to retrieve the screw.
Page 3
USE INSTRUCTIONS
Error Code Key
Code
Meaning
Suggested Actions
E01
Power supply Troubles
Change the Control box
E03
Unbalance more than 10mm
Reset the desk
E04
Unconnected to the handset
Plug into the control box
E05
Anti-collision stop
Release then use again
E06
Main power damage
Change the Control box
E07
Active power protection
Re-plug the power
E08
Unbalance of the desktop
Reset the desk
E09
Overheated
Let the desk cool down for 20 minutes
E11/21
Unconnected with motor M1/M2
Check the cables connection
E12/22
Communication error M1/M2
Change the control box
E13/23
Motor power cable connection issue
M1/M2
Replace the motor or control box
E14/24
Motor sensor errorM1/M2
Change the Motor
E15/25
Motor damage M1/M2
Change the Motor
E16/26
Motor blocked M1/M2
Reset the desk
E17/27
Motor errorM1/M2
Change the Motor
E18/28
Overloaded
Reduce weight on the desk
Page 8
visit our website vwindesk.com/contact for help
call us +1 800 835 2810
www.vwindesk.com
www.vwindesk.com