Cleaning
Use a soft dry cloth to clean your iWear AV920 video eyewear enclosure
and its optics. The cloth carry pouch that came with your eyewear is
good for this. Do not use liquid or spray-on cleaners.
Updating
Your video eyewear is field upgradable to ensure that you have the best
experience possible. To upgrade your iWear AV920 firmware or to
download updated software, please visit
Troubleshooting
The video eyewear will not turn on.
•
Press the Control Wheel on the right side, below the display.
•
Charge the battery.
The product turns off immediately after I turn it on.
•
Charge the battery.
When the battery charge is extremely low, allow it to charge for several
minutes before turning the product on.
There is no audio in one or more speakers.
•
Ensure all connections are fully plugged in.
•
Try to unplug the speakers and plug them back into the viewer’s
temples.
The normal (2D) video is not very clear.
•
Make sure your video eyewear is not in 3D mode.
I’m viewing 3D content but it is fuzzy and not in 3D.
•
Set the View Mode to L/R display and if that does not work, set it to R/L
display made.