VuQube VQ2000, Руководство по эксплуатации

Страница: 7 / 28

Page 5
SECTION 2
VUQUBE ANTENNA CONFIGURATION
The VuQube Model VQ2000 Automatic Satellite System is factory pre-set for DIRECTV standard
digital programming broadcast from the 101° W satellite.
If you also receive your local channels from DIRECTV’s 119 satellite or if you subscribe to Dish
Network or ExpressVu programming, you must use the VuQube hand held controller to
re-configure the antenna to work with your satellite service. Doing this will allow the VuQube to
lock on the correct satellites to receive your programming and also enable automatic satellite
switching via the receiver’s remote control for multi-satellite service.
Antenna configuration is a one time procedure that must be completed before using your
VuQube antenna.
ANTENNA CONFIGURATION PROCEDURE
On pages 6-10, find your service and follow the instructions in the box.
DIRECTV
Single Satellite 101 (Factory Pre-set) Page 6
DIRECTV Plus Page 6
Dish Network
Single Satellite 119 Page 7
Dish 500 Page 7
Dish 1000 - HDTV Page 8-9
Bell ExpressVu
Standard Digital 91 Page 10
HDTV 82/91 Page 10