7
4.4 How to Scan
Note: To scan, make sure your scanner is not connected to the computer.
1.
Turn on your scanner by pressing and holding for 3 seconds.
2.
Place the document on a flat surface and hold down the document with one hand.
3.
Place the scanner on the edge of the paper approximately 5/8 to 3/4 of an inch onto the edge of the paper
to ensure the whole document can be scanned. Make sure to keep the scanning area within the scanning
width indicators marked on the side of the scanner.
4.
Hold the scanner flat against the material and then press once to start the scanning process.
5.
Slide the scanner across the document slowly, keeping your hand stable to get the best picture quality.
During scanning, the scanning status icon will be displayed on the LCD screen to indicate scanning is in
progress.