9
MAINTENANCE AND CLEANING OF RADIATORS
Before each use of the radiator, thoroughly check the entire gas installation (connection set, controller,
burner candle, burner, etc.) to detect any damage or leaks.
Make sure the gas bottle has a gasket at the valve.
If the heater is not used for a long time protect, it from weather conditions. We recommend buying
radiator covers in our online shop:
sklep.vulkan.com.pl
To clean the radiators, use agents available on the market dedicated to maintenance of stainless steel.
In the case where the coating has been damaged and stained, and simple maintenance is not effective,
use of special agents on the basis of a weak solution of oxalic acid or phosphoric acid. After use of
chemical preparations, cleaned surfaces should always be washed with plenty of water and after drying
- a preservative used.
THE MOST COMMON FAULTS AND THEIR REPAIR
CUSTOMER SUPPORT AND SERVICE:
All questions, concerning the repair, maintenance and service of the purchased product, and access
to spare parts please refer to the company Komin-Flex Sp. z o.o. based in Pszczyna ul. Górnośląska 1.
E-mail: [email protected], tel. 032 210 11 44 ext. 38 or 40, mobile phone +48 739 252 008.
The burner’s candle does not light up
•
check that the cylinder’s valve is turned
•
vent the gas system with the burner (see: Valve operation)
•
check if the knob is not based on the body preventing
the excitation of the spark
The gas smell is noticeable
•
check the tightness of the connection set using the
foaming agent (e.g. water with soap)
•
check if the seal of the cylinder is not damaged
The radiator starts up but goes out after a while
•
check whether the burner does not protrude beyond the
edge of the radiator’s body
