4
1. VULKAN
Technical specifications:
Components of the radiator:
Way of packing – 2 cartons:
Carton 1:
the body with the cover and the base (no.5 and
9), socket screws M 5 mm - 3 pcs. (no.8), legs (no.10), roof
fixed on the flame tube (no.12), flat (no.13), mounting pin
(no.14) and manual (optionally the connection set)
Carton 2:
flame tube with a cover (no.4), roof (no.2), 6
sleeves fi14mm (no.3), and 3 wing nuts (no.1)
The order of assembly:
- Remove the flame tube from Carton 2 with the cover
(no.4) and unscrew the wing nuts (no.1)
- Remove the visor (no.2), and three sleeves (no.3), leave
the remaining three on the screws
- Remove the visor from Carton 1 (no.12) and place it on
the screws with sleeves (no.3) on the flame pipe with a
cover (no.4), place the remaining three sleeves (no.3) and
the visor (no.2), and tighten them with the wing nuts (no.1)
- Remove the bottom of the radiator from Carton 1 – body
with the cover (no.5)
- Screw the legs to the base (no.9) (no.10) which are
included in the packaging. Please note that in case of
uneven surfaces you should adjust the level by loosening
or tightening the legs (no.10)
- Fasten the heater to the ground (no.13 and 14)
- Apply the flame tube with the mounted cap on the flange
of the bottom of the radiator (no.6 on no.7) and tighten
with the socket screws (no.8) using the Allen key attached
to the packaging
- Once again check the stability of the radiator adjusting
the feet (no.10)
model
VULKAN 30
VULKAN 37
VULKAN 50
device category
I3B/P
I3B/P
I3B/P
gas type
Propane Butane
Propane Butane PLBP
Propane Butane
pressure
30mbar
37 mbar
50 mbar
power
8,0kW
8,5 kW
7,5kW
gas use
0,50kg/h
0,59 kg/h
0,51 kg/h
max cable length
1,5 mb (40/10 bar ø10)
1,5 mb (40/10 bar ø10)
1,5 mb (40/10 bar ø10)
working pressure
30mbar BG, CY, CZ, DK, EE,
FI, GR, HU, HR, IT, LT, LV, MT,
NL, NO, RO, SE, SI, SK, TR,
37 mbar PL
50 mbar AU DE
nozzle
1,4
1,4
1,00
(1)
(2)
A
B
1
2
3
5
6
7
8
1
2
3
9
10
6
7
8
11
12
12
4
13
14
