Vulcan-Hart RRE24E, Руководство по установке и эксплуатации

Страница: 9 / 28

-
9
-
Do not use a water-jet to clean the griddle as this can cause damage to internal electrical
components.
The Rapid Recovery™ griddle plate is a composite material which is engineered to
provide a high heat transfer rate to the food. The top surface is stainless steel and can be
scored or dented by careless use of a spatula or scraper. Be careful not to dent, scratch,
or gouge the plate surface. Do not try to knock off loo se food that may be on the spatula
by tapping the corner or the edge of the spatula on the griddle surface.
AFTER EACH USE
Clean the griddle with a griddle scraper during the work shift. Take care not to vigorously
strike the back or side splashes with the scraper.
ONCE PER DAY
Thoroughly clean the griddle back splash, sides and front. Turn the griddle off and allow it
to cool down between 275°F-300°F, apply some water to the cooking surface and clean it
with a griddle scraper. Remove, empty and wash the grease drawer in the same manner
as an ordinary cooking utensil.
Wipe the griddle exterior clean with a damp cloth to prevent grease accumulation and dry.
ONCE PER WEEK
Clean the griddle surface thoroughly with water, Scotch -Brite
™ Quick Clean Griddle
System or Ecolab Grease Express™ High-Temp Grill Cleaner. Be sure the cleaning agent
is thoroughly removed by flushing with clear water. After cleaning, reseason the cooking
surface according to the instructions in this manual.
If the griddle usage is very high, consider conducting this weekly cleaning procedure
more than once per week.
Do not use a brick or griddle stone for cleaning.
Do not use chlorine sanitizer in contact with griddle. Contact can cause discoloration,
corrosion and permanent damage.
Do not use cleaning agents including Sodium Hydroxide, which is common in household
oven cleaners.