– 3 –
Installation, Operation and Care of
ECO2D & ECO2C
ELECTRIC CONVECTION OVENS
KEEP THIS MANUAL FOR FUTURE USE
GENERAL
The ECO2D Electric Convection Oven is a single cavity oven and features a solid state thermostat,1-hour
dial timer, two-speed
1
⁄
2
HP
(0.37 KW)
electric motor and five racks as standard equipment. Additional
oven racks are optional. Each oven is provided with a standard 208 or 240 volt, 60 Hz., and 1- or
3-phase electrical service. Porcelain oven interior is standard; stainless steel interior is optional.
Painted steel exterior is standard; stainless steel exterior is optional. Door hinged on left is standard;
right hinged door is optional.
Model ECO2C has a different control than ECO2D.
A single oven may be installed on an open stand with lower storage rack (optional). A variety of legs,
casters and stacking options are available.
Features of the models are shown below:
Your Vulcan Electric Convection Oven is produced with quality workmanship and material. Proper
installation, usage and maintenance of your oven will result in many years of satisfactory performance.
It is suggested that you thoroughly read this entire manual and carefully follow all of the instructions
provided.
INSTALLATION
UNPACKING
Immediately after unpacking the oven, check for possible shipping damage. If this oven is found to be
damaged, save the packaging material and contact the carrier within 15 days of delivery.
Prior to installation, verify that the electrical supply agrees with the specifications on the oven data
plate, located on the inside of the top front cover.
Do not use the door or its handle to lift the oven.
LOCATION
The installation location must allow adequate clearances for servicing and proper operation.
MODEL
THERMOSTAT
TIMER
ROAST &
GENTLE
RACK #
HOLD
BAKE
COOK TIMES
ECO2D
Solid State
1-Hour Dial
ECO2C before October 1999
Electronic
Electronic
X
X
ECO2C after October 1999
Programmable
Programmable
X
X
