Contact us for assistance: (866) 985-7877 | www.wtliving.com
7
6
Connect hose and regulator to cylinder. The propane gas
and cylinder are sold separately. Use a standard 20lb
propane cylinder only. Use this fire pit only with a propane vapor
withdrawal supply system. See chapter 5 of the standard storage
and handling of liquefied petroleum gas, ANS/NFPA 58. Your local
library or fire department should have this book.
Storage of an appliance indoors is permissible only if the cylinder
is disconnected and removed from the appliance. A cylinder must
be stored outdoors in a well-ventilated area out of the reach of
children. A disconnected cylinder must have dust caps tightly
installed and must not be stored in a building, garage or any other
enclosed area. The maximum inlet gas supply pressure: 250 psi,
the minimum inlet gas supply pressure: 5 psi.
The minimum hourly of 10,000 BTU is required input rating for a
fire pit for automatic operation at ratings less than full
input rating. The pressure regulator and hose assembly
supplied with the appliance must be used.
The installation must conform with local codes, or in
the absence of local codes, with national fuel gas code,
ANS Z223.1/NFPA54, natural gas and propane Installation
Code, CSA B 149.1, or propane storage and handling
code, B149.2.
ASSEMBLY
5
Pour the
Fire Glass
K
around the
Burner
B
. Put the
Burner
Cover
A
on the
Burner
when the fire pit table is NOT in
use. When the fire pit is completely cool, you may cover it with
Protective Cover
L
. DO NOT PUT THE PROTECTIVE FIRE PIT
COVER ON A HOT FIRE PIT TABLE.
5
11
6
6
6
A
K
