Page 2
5.
Insert the two
supporting poles
onto the holes
on top shelf.
Wire holes can
face inside or
outside.
B.
Tighten the pull out
shelf onto leg on
both side as shown.
7.
Tighten the two supporting poles onto the top shelf with two hex
head screws (see screw table F) as shown.
Top horizontal mount
6.
Insert the two horizontal
mounts onto the
supporting poles. Note:
The mount with
adjustable screw(see
screw table H) should
go on the bottom. Screw
(see screw table G) the
top mount to desired
height from A to F. Adjust
the bottom mount height
according to the TV
screw position as shown.
Bottom horizontal mount
9.
Use the appropriate bolts needed (M4, M5, M6 or M8, see screw
table A,B,C or D) to fasten the flat panel TV onto the horizontal
mounts as shown.
8.
Electrical bracket assembly instruction
A. Push power cord into cord winder bracket.
B. Attach electrical bracket to back side of top shelf with two nuts
and bolts(see screw table E). Tighten nuts and bolts securely.
Wrap power cord around wings of the bracket.
Side extended pull out shelf assembly instruction
A.
Due to limited packaging space, pull-out shelf was shorten. Adjust
the pull-out shelf out to the maximum inside width of the cart inside
as the pull-out shelf will be installed inside of the legs.
If any parts or hardware are missing or damaged,
Do Not
Return
the unit to your dealer. Call the
VTI
helpline at
(626)575-1860 for immediate parts replacement.
Manufacturing, Inc.
V T I
11015 Rush street, # 4,
South El Monte, CA 91733, USA
Tel.:(626)575-1860; Fax:(626)575-1862.
10.
Handle assembly
Instruction
( Optional for cart handle)
A. Unscrew the scews from the handle.
B. Attach the handle to the top shelf (either side) and tighten
handle to the shelf with screws from the inside under the shelf
as shown.
