background image

1

INTRODUCTION...............................................................................................................3
Parts Check List:.................................................................................................................4
IMPORTANT SAFETY INSTRUCTIONS.........................................................................5
REPLACING THE HANDSET BATTERY...........................................................................7
SPARE BATTERY CHARGER............................................................................................8
GETTING STARTED............................................................................................................9
Setting Up Your VT9141.....................................................................................................9
WALL MOUNTING............................................................................................................10
HANDSET FEATURES..................................................................................................11

INT.COM/LOW BATT LED.............................................................................................11
PHONE KEY................................................................................................................11
TONE/* KEY..................................................................................................................11
HOLD KEY.....................................................................................................................11
PGM KEY.....................................................................................................................11
MEM KEY..................................................................................................................11
VOLUME SWITCH.........................................................................................................11
CHAN KEY..................................................................................................................11
HANDSET JACK.........................................................................................................11
OFF KEY.................................................................................................................11
INT.COM KEY..............................................................................................................11
PRV KEY..................................................................................................................11
REDIAL/PAUSE KEY.....................................................................................................11
BASE UNIT FEATURES................................................................................................12
PRIVACY KEY..............................................................................................................12
IN USE LED.............................................................................................................12
POWER LED................................................................................................................12
FLASH KEY..............................................................................................................12
REDIAL KEY...................................................................................................................12
MUTE KEY/LED..........................................................................................................12
HOLD KEY..................................................................................................................12
MEMORY KEY.................................................................................................................12
SPARE BATT LED..........................................................................................................12
CHARGE LED................................................................................................................12
VOLUME UP KEY......................................................................................................13
VOLUME DOWN KEY....................................................................................................13
TONE/* KEY................................................................................................................13
SPEAKERPHONE KEY................................................................................................13
SPEAKERPHONE LED................................................................................................13
INTERCOM KEY/LED....................................................................................................13
TONE/PLUSE SWITCH.................................................................................................13
RINGER SWITCH..........................................................................................................13

MAKING CALLS..............................................................................................................14
ANSWER A CALL.............................................................................................................15
TO PUT A CALL ON HOLD...........................................................................................15
THE MUTE FEATURE....................................................................................................15

TABLE OF CONTENTS

Содержание vt9141




































Отзывы: