14
IMPORTANT: Whenever the
handset battery is removed, the
handset must be reinitialized on
the base unit cradle after the bat-
tery is replaced.The CHARGE
LED on the base unit will flash
during the initialization.
MAKING CALLS
You can make calls directly from the
handset whether you are at the base
or away from it. You can also make
calls on the speakerphone without
using the handset.
From the Handset
INT.COM/LOW BATT
900
MHz
CORDLESS
PHONE
CHAN
OFF
FLASH
2
ABC
1
3
DEF
4
GHI
5
JKL
6
MNO
1.Pick up the handset and press
PHONE.
2.When you hear a dial tone, dial the
number. The LED “IN USE” (on the
base unit) and “PHONE” (on the
handset) will light up.
If you make a mistake when dialing,
press OFF to hang up, then press
PHONE to get the dial tone again.
You must always press PHONE before
you can dial a call on the handset.
Disconnecting
To end a call,
INT.COM/LOW BATT
900
MHz
CORDLESS
PHONE
CHAN
OFF
FLASH
2
ABC
1
3
DEF
4
GHI
5
JKL
6
MNO
1.Place the Handset back in the Base;
OR,
2.Press OFF on the Handset.
From the Base
MIC
INTERCOM SPEAKERPHONE
7
PQRS
8
TUV
9
WXYZ
TONE
0
OPER
The base unit allows you to make and
receive calls without using the hand-
set. You can use the speakerphone on
base while the handset is in or out of
the base.
1.Press the SPEAKERPHONE on the
base unit.
2.You will hear the dial tone over the
speaker.
3.Adjust the volume controls on the
face of the base unit if necessary.
4.Dial the number on the dial pad of
the base unit.
5.When the party answers, speak to-
ward the microphone.
OPERATING INSTRUCTIONS
