ANS.ON/OFF
Security Code & DTAM Operation
SECURITY CODE:
When the handset is put on the cradle, a 16 bits security code will
generate automatically for handset command verification.
NOTE:
There is a short
B E E P
to indicate that registration has been
successful . When the unit is put in the charge mode, the base will
generate a 16 bit security code to the handset. When the base
receives the acknowledge code from the handset, it means that the
exchange security code is done and the
B E E P
is announced.
DIGITAL ANSWER MACHINE OPERATION:
You can operate these DTAM functions when the handset is not in
use.
SETUP:
Your VT650 is preset to 'Answer On' and will answer calls
after 2 rings if new messages have been recorded or after 4 rings if
no messages have been recorded.
When set to 'Answer Off', your VT650 will answer calls after 8 rings
if new messages have been recorded or after 10 rings if no new
messages have been recorded.
SWITCHING THE ANSWERING MACHINE ON/OFF:
Press and release
Announces 'Answer Off' or 'Answer On'
18
ANS.ON/OFF
STOP
To Select Outgoing Message (OGM) & New Message Alert
Note:
Remember that OGM1 is for normal use and OGM2 is for
'Answer Only' in which the caller cannot leave a message.
TO SELECT OUTGOING MESSAGE:
Press the
button and hold to select OGM1 or OGM2
VT650 will play message of your choice.
NEW MESSAGE ALERT:
To set
B E E P
alert for new messages
until
B E E P
to confirm function is on. The
display will show 'bn'.
press
STOP
until
B E E P
to confirm function is on. The
display will show 'bf'.
press
To release function
19
VT650 User Guide A/W 30/5/02 2:07 pm Page 19
