VTech vt2458 Скачать руководство пользователя страница 15

28

29

Technical Specifications

FREQUENCY CONTROL

Crystal controlled
PLL synthesizer

TRANSMIT FREQUENCY

Base:

2411.15 - 2418.4 MHz

Handset: 912.75  - 917.10 MHz

RECEIVE FREQUENCY

Base:

912.75  - 917.10 MHz

Handset: 2411.15 - 2418.4 MHz

CHANNELS

30 Channels

NOMINAL EFFECTIVE RANGE

Maximum power allowed by FCC and IC.
Actual operating range may vary
according to environmental conditions at
the time of use.

SIZE
Handset:   203.3mmx56.0mmx39.8mm
(including antenna)

Base  :    168.1mmx130mmx114mm
(including antenna)

WEIGHT
Handset :

143.6 grams

Base    :

328.2 grams

(excluding battery pack)

POWER REQUIREMENTS

Handset:  3.6V 400mAh  Ni-Cd  Battery Pack

Base :   9V DC @ 500mA

MEMORY

Speed Dial:  10 Memory locations

 16 digits per location

SPECIFICATIONS ARE TYPICAL AND
MAY CHANGE WITHOUT NOTICE.

this equipment, or equipment malfunctions, may give the telecommunications company
cause to request the user to disconnect the equipment.

Users should ensure for their own protection that the electrical ground connections
of the power utility, telephone lines and internal metallic water pipe system, if present,
are connected together. This precaution may be particularly important in rural areas.

Caution :
Users should not attempt to make such connections themselves, but should contact
the appropriate electrical inspection authority, or electrician, as appropriate.

Your Cordless Phone is designed to operate at the maximum power allowed by
the FCC and IC. This means your Handset and Base Unit can communicate only
over a certain distance - which will depend on the location of the Base Unit and Handset,
weather, and the construction and layout of your home or office.

The RBRC 

®

  Seal

The RBRC 

®

   Seal on the  nickel-cadmium battery indicates that  VTech Communications,

Inc. is voluntarily participating in an industry program to collect and recycle these
batteries at the end of their useful lives, when taken out of service within the United
States and Canada.

The RBRC

®

  program provides a convenient alternative to placing

used nickel-cadmium batteries into the trash or municipal waste, which
may be illegal in your area.

VTech’ s participation in RBRC

®

   makes it easy for you to drop off the

spent battery at local retailers participating in the RBRC

®

  program or at authorized

VTech product service centers. Please call 1-800-8-BATTERY    for information on
Ni-Cd battery recycling and disposal bans/restrictions in your area. VTech’s involvement
in this program is part of its commitment to protecting our environment and conserving
natural resources.

RBRC

®

  is a registered trademark of Rechargeable Battery Recycling Corporation.

FCC, ACTA and IC Regulations

Additional Information

Additional Information

Содержание vt2458

















Отзывы: