VTech vt2458 Скачать руководство пользователя страница 1

1

When using your telephone equipment, basic safety precautions should always be followed to reduce the
risk of fire, electric shock and injury, including the following:
1. Read and understand all instructions.
2. Follow all warnings and instructions marked on the product.
3. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol

cleaners. Use a damp cloth for cleaning.

4. Do not use this product near water (for example, near a bath tub, kitchen sink, or swimming pool).
5. Do not place this product on an unstable cart, stand, or table. The product may fall, causing serious

damage to the product.

6. Slots and openings in the cabinet and the back or bottom are provided for ventilation. To protect it

from overheating, these openings must not be blocked by placing the product on the bed, sofa, rug,
or other similar surface. This product should never be placed near or over a radiator or heat register.
This product should not be placed in a built-in-installation where proper ventilation is not provided.

7. This product should be operated only from the type of power source indicated on the marking label.

If you are not sure of the type of power supply to your home, consult your dealer or local power
company.

8. Do not allow anything to rest on the power cord. Do not locate this product where the cord will be

abused by persons walking on it.

9. Never push objects of any kind into this product through cabinet slots as they may touch dangerous

voltage points or short out parts that could result in a risk of fire or electric shock. Never spill liquid
of any kind on the product.

10.To reduce the risk of electric shock, do not disassemble this product. If service or repair work is

required, contact VTech Customer Service at 1-800-595-9511. Opening or removing cabinet parts
other than specified access doors may expose you to dangerous voltages or other risks. Incorrect
reassembling can cause electric shock when the appliance is subsequently used.

11.Do not overload wall outlets and extension cords as this can result in the risk of fire or electric shock.
12.Unplug this product from the wall outlet:
a) When the power supply cord or plug is damaged or frayed.
b) If liquid has been spilled into the product.
c) If the product has been exposed to rain or water.
d) If the product does not operate normally by following the operating instructions. Adjust only those

controls that are covered by the operating instructions because improper adjustment of other controls
may result in damage and will often require extensive work to restore the product to normal operation.

e) If the product has been dropped and the cabinet has been damaged.
f) If the product exhibits a distinct change in performance.
13.Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a

remote  risk of electric shock from lighting.

14.Do not use the telephone to report a gas leak in the vicinity of the leak.

I

f you have questions about this product, or if you're

having difficulty with setup or operation, do not return
your phone to the store. Call our Customer Support
Center at:

1-800-595-9511

In Canada, call

1-800-267-7377

Important  Safety Instructions

Содержание vt2458

















Отзывы: