11
10
2
3
CAUTION:
TO
REDUCE RISK OF FIRE,
USE ONLY VTECH
80-5017-00-00
CAUTION:
TO
REDUCE RISK OF FIRE,
USE ONLY VTECH
80-5017-00-00
BATTER
Y
INSTALL
THIS
SIDE UP
1
8L55
!
+
Getting Started
Getting Started
Spare Battery Charger/Power Backup Function
1.
Open the spare battery charger
by pressing the release button,
located on the left-hand side of
the Base Unit. A drawer will
open to reveal the spare battery
compartment.
2.
Place a battery pack in the
drawer with the charge contacts
facing up and to the right.
3.
Push the drawer closed.
The spare battery takes 24 hours to
fully charge a drained battery.
The GIGAPHONE uses the spare battery charger in the Base Unit to provide
operational backup in the event of a power failure. With the a fully charged
battery pack in the spare battery charger, you will still be able to place and
receive calls from the Handset for up to one hour. During Power Backup mode,
you will not be able to use the Base Unit.
The spare battery pack can also be used to replace a drained handset battery,
ensuring uninterrupted use.
NOTE :
When using the GIGAPHONE during Power Backup mode, audio quality may
be compromised due to reduced power availability.
Checking for Dial Tone
After the battery is charged press a LINE Key on the Handset. PHONE ON
will appear on the handset display, and you will hear dial tone. If not, see
In Case of Difficulty
.
Tone/Pulse Selection
Your GIGAPHONE is set for TONE dialing. See Handset and Base Settings-
SELECT TONE/PULSE AT THE BASE UNIT
for details.
CAUTION: Use only the Vtech power supply provided with your
cordless phone.
IMPORTANT:
FOR MAXIMUM PERFORMANCE OF YOUR CORDLESS TELEPHONE
SYSTEM:
1.
Choose a central location for your Base Unit.
2.
Install your Base Unit and Extension Handsets
away from electronic equipment, such as personal
computers, television sets and microwave ovens.
3.
In locations where there are multiple cordless
telephones, separate base units as much as
possible.
4.
Install your telephone equipment away from
heat sources and sunlight.
5.
Avoid excessive moisture, dust or extreme cold.
Dial Tone
BEFORE USING YOUR HANDSET(S), CAREFULLY PEEL OFF THE
PROTECTIVE FILM, COVERING THE DISPLAY.
