background image

1.

IMPORTANT SAFETY INSTRUCTIONS

When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, 
electric shock and injury, including the following:
1. Read and understand all the instructions.
2. Follow all warnings and instructions marked on the product.
3. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp 

cloth for cleaning.

4. Do not use this product near water (for example, near a bath tub, kitchen sink, swimming pool).
5. Do not overload wall outlets and extension cords as this can result in the risk of fire or electric shock.
6. Unplug this product from the wall outlet and refer servicing to VTech under the following conditions:

•  When the power supply cord or plug is damaged or frayed.
•  If the product does not operate normally by following the operating instructions. 
•  If the product has been dropped and the cabinet has been damaged.
•  If the product exhibits a distinct change in performance.

7. Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of 

electric shock from lightning.

8. Do not use the telephone to report a gas leak in the vicinity of the leak.
9. Use only the supplied NiMH (Nickel Metal Hydride) batteries! The operation periods for the handsets are only 

applicable with the default battery capacities. 

10. The use of other battery types or non-rechargeable batteries/primary cells can be dangerous. These may cause 

interference and/or unit damages. The manufacturer will not be held liable for damage arising from such non-
compliance.

11. Do not use third party charging bays. The batteries may be damaged.
12. Please note the correct polarity while inserting the batteries.
13. Do not immerse batteries in water, do not place in fire.

If you have questions about this product, or having difficulty with setup or operation, call our VTech Electronics (HK) Ltd.
Customer Service Centre Tel: 852-2776 3223
Technical Inquiry Hotline Tel: 852-2667 7433

Содержание VT1047







































Отзывы: