34
Stop Message Playback
1. Pressing “#5” during message playback will stop playback.
Deleteing Messages
1. Pressing “#9” once during message playback to delete the current message.
Note: Playback will pause if “#” or “ ” is entered. ITAD will wait for the command in
the following 2 seconds. If no further tone is entered, playback will be resumed.
Memo Recording
1. Press “ 8”.
2. After selecting the mailbox by entering command “1”, “2”, “3”, You will hear, “Now
recording”, followed by a beep.
3. Enter “#5” to stop recording when you have finished.
Change OGM Remotely
1. Enter “ 7” to recording a new OGM. You will hear, “Now recording”, followed by
a beep to signal start of recording.
2. Press “#5” to stop recording , Your new OGM will play back automatically.
Check OGM Remotely
Enter “#7” to review OGM. You will hear playback of OGM followed automatically.
Turning ITAD ON or OFF
Pressing “#0” toggles the ITAD ON/ OFF. “Answer machine on”, or “ Answer ma-
chine off” will be announced, followed by a beep.
Voice Menu for Remote Operation
The system provides two pre-recorded voice menus to help you during remote
operation. Press “*5” to go back to the simple voice menu.
The simple voice menu is as follows:
•
Press “#1” to play mailbox 1.
•
Press “#2” to play mailbox 2.
•
Press “#3” to play mailbox 3.
•
Press “#5” to stop.
•
Press “#4” to repeat the message.
•
Press “#6” to skip the message.
•
Press “#9” to erase the message.
•
Press “*5” for other functions.
*
*
REMOTE OPERATION OF ITAD
A
D
V
A
NCED OPERA
TION