11
USING REDIAL
Press PHONE. Listen for dial tone.
Press REDIAL/PAUSE. The last number you called will auto-
matically be redialed.
ANSWERING CALLS
To answer a call, press any key other than the OFF key.
AUTO ANSWER
When Auto Answer is set to ON (see SETTING UP YOUR
VT9122), your Handset will
automatically answer an incoming call when you remove it from the Base cradle.
FLASH
When you receive a
Call Waiting alert, press
PHONE/FLASH to switch to the incoming call.
Press PHONE/FLASH again to return to the first call.
HOLD
To place your call on hold, press HOLD. Press HOLD again
to return to your call.
NOTE: If you have a call on hold, and pick up a parallel extension phone, your
VT9122 will
automatically drop the call and return to idle mode.
PAGE
The Base can signal the Handset by means of the PAGE key.
This is helpful in locating a misplaced Handset. Press PAGE
at the Base. The Handset will generate a series of tones
(different than inbound call ringing) for a maximum of 90 sec-
onds, and will display:
Press PAGE at the Base or OFF on the Handset to end the Page.
BASIC OPERATION
B
ASIC OPERA
TION
REDIAL