manualshive.com logo in svg

VTech VT 1901, Руководство пользователя

Поделиться
Скачать
VTech VT 1901 Скачать руководство пользователя страница 12

12

Follow the steps below:
1. Remove the battery case cover  by

pressing on the ridged lines and
sliding downward.

2. Discard the old battery pack.  Don’t

put the old battery pack in a trash
compactor or a fire - it could burst.

3. Place the new battery pack in the

battery compartment with the metal
contacts facing down.

4. Replace the battery case cover  by

sliding the cover upwards.

5. If the new battery pack is not

already charged, place the handset
in the cradle of the base unit to
allow it to charge for 16 hours.

CAUTION:
To Reduce the Risk of Fire or Injury
to Persons, Read and Follow the
Instructions

1. Use only VTECH rechargeable

battery pack.

2. Do not dispose of the battery in a

fire.  The cell may explode.

IMPORTANT:
Do not dispose of this battery into
household garbage. For informa-
tion on recycling or proper disposal,
consult your local solid waste col-
lection or disposal organization.

3. Do not open or mutilate the battery.

Released electrolyte is corrosive
and may cause damage to the
eyes or skin.  It may be toxic if
swallowed.

4. Exercise care in handling batteries

in order not to short the battery with
conducting materials such as rings,
bracelets, and keys.  The battery or
conductor may overheat and cause
burns.

To purchase replacement battery
packs, call VTECH Communications at
1-800-595-9511.  In Canada, call
VTECH Electronics  at 1-800-267-
7377.

PLEASE NOTE THE
CORRECT POSITION
OF THE BATTERY
PACK WHEN
CHANGING BATTERY

PLACE THE NEW
BATTERY PACK
INTO THE
BATTERY
COMPARTMENT

SLIDE IN THE
BATTERY
COVER

REPLACING THE HANDSET BATTERY PACK

PRESS and SLIDE
DOWNWARD

1901MANUAL

1/28/99, 3:29 PM

12

Содержание VT 1901


































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды