VSP735 Administrator and Provisioning Manual
150
Appendix A: Configuration File Settings
“softkey” Module: Custom Soft Key Settings
The custom soft key settings allow you to select which soft keys can appear on the
Idle screen, the Call Active screen, the Call Held screen and the Live Dial screen. You
can also specify the position of each soft key. Softkeys appear on the phone screen
in the same order as the softkey values you enter. Enter soft key values separated
by commas. For more information, see Customizing Soft Keys on page 13. You can
specify a maximum of 12 soft keys (three levels) for each parameter.
The soft key parameters follow the format softkey.[element].
Setting:
softkey.idle
Description:
Specifies the soft keys visible on the idle screen.
Values:
blank, dir , call_log,
redial, message, dnd,
cfwd, cfna, cfwd_all,
cfwd_busy, intercom,
retrieve, callback,
grp_pickup, dir_pickup,
line, settings
Default:
line,cfwd,dir,settings
Setting:
softkey.call_active
Description:
Specifies the soft keys visible on the active call screen.
Values:
blank, new, park_call,
end, hold, transfer, conf,
xferline, confline
Default:
end,hold,transfer,conf,
xferline,confline
Setting:
softkey.call_held
Description:
Specifies the soft keys visible on the held call screen.
Values:
blank, new, park_call,
retrieve, grp_pickup,
dir_pickup, end, resume,
transfer, conf, xferline,
confline
Default:
end,new,resume,transfer,
conf,xferline,confline