VSP735 Administrator and Provisioning Manual
149
Appendix A: Configuration File Settings
Setting:
page_zone.x.multicast_address
Description:
Enter the multicast IP address that the deskset will monitor. The range
of valid IP addresses is 224.0.0.0 to 239.255.255.255.
Values:
IPv4 IP address
Default:
blank
Setting:
page_zone.x.multicast_port
Description:
Enter the multicast port associated with the multicast IP. The range of
valid ports is 1 to 65535.
Values:
1–65535
Default:
blank
Setting:
page_zone.x.accept_incoming_page
Description:
Enables or disables the deskset from receiving incoming multicast
pages for that paging zone. If disabled, the deskset can make
outgoing multicast pages only.
Values:
0 (disabled), 1 (enabled)
Default:
1
Setting:
page_zone.x.priority
Description:
Set the paging zone priority from 1 to 10. Zones with a priority higher
than another zone can interrupt the lower-priority zone’s active page.
Values:
1–10
Default:
5
Setting:
page_zone.call_priority_threshold
Description:
Set the call_priority_threshold. If the paging zone priority
(page_zone.x.priority) is higher or equal to the call priority, then a
multicast page can interrupt an active, dialing, or incoming call.
Values:
1–10
Default:
2